Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.2. Transfer case
8.3. Differentials, power shafts / semi-axis
8.3.1. General information and check of a condition of components
8.3.2. Removal and installation of differentials
8.3.3. Replacement of sealing laying of forward differential
8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential
8.3.5. Removal, service and installation of the oil pump
8.3.6. Removal and installation of back semi-axes
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 








8099f600






8-3-4-snyatie-i-ustanovka-soedinitelnogo-flanca-i-zamena-salnika-zadnego-differenciala.html

8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential

 PERFORMANCE ORDER

  1. Remove the driveshaft (see. Removal and installation of driveshafts).
  2. By means of a special key (J34311) give a nut of a leading gear wheel.
  3. By means of a suitable stripper remove a connecting flange.
  4. Having hooked, take from a landing nest an epiploon.
  5. By means of a cylindrical opravka (KV38102510) plant a new epiploon.

As an opravka the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach.

  1. Further installation is made as it should be, the return to an order of dismantle of components, - track, that all fixture was tightened with demanded effort.

«on page back
8.3.3. Replacement of sealing laying of forward differential		 on the following page»
8.3.5. Removal, service and installation of the oil pump