Infiniti QX4 service since 1996 of release
	1. Introduction
	2. Maintenance instruction
	3. Routine maintenance
	4. Engine
	5. Cooling and heating systems
	6. Power supply systems and managements
	7. Start and charge systems
	8. Transmission line
		8.1. 4-step automatic transmission
			8.1.1. General information
			8.1.2. AT problem diagnostics - the general information
			8.1.3. Electronic and hydraulic control system of 4-step AT
			8.1.4. Removal and transmission installation
			8.1.5. Replacement of an epiploon of lengthening of transmission
			8.1.6. Removal and installation of a cooler of ATF
			8.1.7. Removal and installation of klapanny assembly of a hydraulic contour of management of AT
			8.1.8. Removal, check of a condition and installation of a driving cable of blocking of switchings
			8.1.9. Adjustment of a drive of switching of AT
			8.1.10. Adjustment of the sensor switch of provisions of AT / permission of start
			8.1.11. Major maintenance of AT
		8.2. Transfer case
		8.3. Differentials, power shafts / semi-axis
		8.4. Driveshafts
	9. Brake system
	10. Suspension bracket and steering
	11. Body
	12. Electric equipment

8-1-8-snyatie-proverka-sostoyaniya-i-ustanovka-privodnogo-trosa-blokirovki-pereklyuchenijj.html

8.1.8. Removal, check of a condition and installation of a driving cable of blocking of switchings

Details of installation of a driving cable of blocking of switching

PERFORMANCE ORDER

Liberate ползун from the holder of a regulator and disconnect a cable from a driving rod.
Connect a cable to the lock of blocking of a steering column.
Latch a cable in clamps and by means of a collar connect to an operating cable. Transfer the selector lever to the situation "R".
Fill a driving rod in the holder of a regulator.
Fix a cover of a casing of a cable in a basic arm. With the help ползуна fix the holder of a regulator on a rod.