Infiniti QX4 service since 1996 of release
	1. Introduction
	2. Maintenance instruction
	3. Routine maintenance
	4. Engine
	5. Cooling and heating systems
	6. Power supply systems and managements
	7. Start and charge systems
	8. Transmission line
	9. Brake system
		9.1. Specifications
		9.2. System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
		9.3. Check of a condition and replacement of brake lines and hoses
		9.4. Replacement of blocks of disk brake mechanisms of forward wheels
		9.5. Removal and installation of a support of the disk brake mechanism
		9.6. Removal and installation of a brake disk
		9.7. Replacement of brake boots of drum-type brake mechanisms of back wheels
		9.8. Removal and installation of the main brake cylinder (GTTs)
		9.9. Removal and installation of assembly of the vacuum amplifier of brakes
		9.10. Pumping of brake system
		9.11. Adjustment of a drive of the parking brake
		9.12. Adjustments of a pedal of a foot brake
		9.13. Adjustment of a spring of the valve regulator (LSV) sensitive to loading
		9.14. Adjustment of sensors switches of stoplights and темпостата
		9.15. Removal and ABS hydromodulator installation
		9.16. Removal and G-sensor installation
		9.17. Check of serviceability of functioning of wheel ABS sensors
		9.18. Check of serviceability of functioning of the G-sensor
		9.19. Check of serviceability of functioning of the relay of the driving electromotor of the hydromodulator
		9.20. Check of serviceability of functioning of the relay of the electromagnetic valve of the hydraulic ABS modulator
	10. Suspension bracket and steering
	11. Body
	12. Electric equipment

9-16-snyatie-i-ustanovka-g-datchika.html

9.16. Removal and G-sensor installation

PERFORMANCE ORDER

Disconnect a negative wire from the battery.
Disconnect electroconducting from the sensor of accelerations under assembly of the central console (see an illustration the arrangement Scheme on the car of the elements ABS).
Turn out fixing bolts and remove the sensor.
Installation is made upside-down — track, that the fixture was tightened with demanded effort.

«on page back
9.15. Removal and ABS hydromodulator installation

on the following page»
9.17. Check of serviceability of functioning of wheel ABS sensors